Purani RO12000 4″ Commercial Reverse Osmosis System

The most energy-efficient and cost-effective system, Ecosoft MO12000 provides the highest output with the lowest energy use only 0.67 kW to produce 500 liters per hour.
The system design and reliable components enable continuous 24/7 operation, make this system popular for car washes, hotels, laundries, and water bottling.

Key features:

– Flow capacity: 500 L/h
– Reliable and stable performance
– Flexible flow adjustment for various feed water
– Pre-designed options for tailor-made solutions
– Reliable Ecosoft OC5000 controller
– Energy-efficient and quiet Grundfos® pump

Water-saving function:
Its open-frame design ensures quick maintenance access, while the OC5000 controller allows full customization to suit specific applications and conditions.
Permeate flushing extends the service life of membrane elements by up to 30% and significantly reduces the load on pre-filters

Parameters:
– Flow capacity – Flow capacity: 500 L/h
– Water consumption for forward flush 40L
– Waste water –
– Inlet water pressure 2…4 bar
– Power supply – 1 × 220–230 VPurani RO12000 Datasheet
– Rated power – 0.67 kW

System components:
– Pump: Grundfos® CM 1-10, high-energy efficiency (IE4, A+), low noise and vibration, AISI 304 – 1 pcs
– Membrane vessel: 300 psi – 2 pcs
– Electrical panel and controller: Ecosoft OC5000
– Conductivity cell (permeate): yes
– Sediment prefilter: BB20 – 1 pcs
– Sediment filter: PP melt-blown 4.5″ × 20″, 5 µm – 1 pcs
– Frame: Steel, powder-coated – 1 pcs
– Inlet solenoid valve: Danfoss – 1 pcs
– Forward flush solenoid valve: Danfoss – 1 pcs
– Float switch: 1 pcs
– Pressure switch after sediment filter: adjustable
– Pressure switch on permeate line: adjustable
– Permeate rotameter: 2–18 LPM, non-adjustable
– Concentrate rotameter: 2–18 LPM, adjustable
– Permeate recycle: 2–18 LPM, adjustable
– Pressure gauge after sediment filter: 10 bar
– Operating pressure gauge: 16 bar
– Connection feed water: G ½
– Connection permeate: G ½
– Connection concentrate: G ½
– Connection ports for dosing pump: G ½
– Connection ports for permeate flush kit: G ½
– Connection ports for raw water blending kit: G ½

Feed water requirements:

– Max. inlet water TDS (Total dissolved salts) – 3000 ppm
– Membrane vessel: 300 psi – 2 pcs
– Electrical panel and controller: Ecosoft OC5000
– Conductivity cell (permeate): yes
– Sediment prefilter: BB20 – 1 pcs
– Sediment filter: PP melt-blown 4.5″ × 20″, 5 µm – 1 pcs
– Frame: Steel, powder-coated – 1 pcs
– Inlet solenoid valve: Danfoss – 1 pcs
– Forward flush solenoid valve: Danfoss – 1 pcs
– Float switch: 1 pcs
– Pressure switch after sediment filter: adjustable
– Pressure switch on permeate line: adjustable
– Permeate rotameter: 2–18 LPM, non-adjustable
– Concentrate rotameter: 2–18 LPM, adjustable
– Permeate recycle: 2–18 LPM, adjustable
– Pressure gauge after sediment filter: 10 bar
– Conductivity cell (permeate): yes
– Sediment prefilter: BB20 – 1 pcs
– Sediment filter: PP melt-blown 4.5″ × 20″, 5 µm – 1 pcs
– Frame: Steel, powder-coated – 1 pcs
– Inlet solenoid valve: Danfoss – 1 pcs
– Forward flush solenoid valve: Danfoss – 1 pcs
– Float switch: 1 pcs
– Pressure switch after sediment filter: adjustable
– Pressure switch on permeate line: adjustable
– Permeate rotameter: 2–18 LPM, non-adjustable
– Concentrate rotameter: 2–18 LPM, adjustable
– Permeate recycle: 2–18 LPM, adjustable
– Pressure gauge after sediment filter: 10 bar

Service:
Cartridge replacement schedule:
– Ecosoft PP melt-blown sediment filter, 4.5″ × 20″, 5 µm – replace every 4 months, or if the pressure drop reaches 0.5 bar
– Membrane element – replace or clean every 6 months if productivity decreases by more than 15–20%, water quality worsens by 15–20%, or pressure drop increases by 15–20%

RESOURCES:
Purani RO12000 Datasheet
Purani RO12000 User Manual